Descargar Imprimir esta página

MSW Motor Technics CBC-180W-10A Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
DE
d)
Nicht
verwendete
Werkzeuge
sind
außerhalb
der Reichweite von Kindern sowie von Personen
aufzubewahren, welche weder das Gerät selbst, noch
die entsprechende Anleitung kennen. In den Händen
unerfahrener Personen können derlei Geräte eine
Gefahr darstellen
e)
Halten Sie das Gerät im einwandfreien Zustand.
Überprüfen Sie vor jeder Arbeit, ob allgemeine
Schäden vorliegen oder Schäden an beweglichen
Teilen (Bruch von Teilen und Komponenten oder
andere Bedingungen, die den sicheren Betrieb der
Maschine beeinträchtigen könnten). Im Falle eines
Schadens muss das Gerät vor Gebrauch in Reparatur
gegeben werden.
f)
Halten Sie das Gerät außerhalb der Reichweite von
Kindern.
g)
Reparatur und Wartung von Geräten dürfen nur
von qualifiziertem Fachpersonal und mit Original-
Ersatzteilen durchgeführt werden. Dadurch wird die
Sicherheit bei der Nutzung gewährleistet.
h)
Um die vorgesehene Betriebsintegrität des Gerätes
zu gewährleisten, dürfen die werksmäßig montierten
Abdeckungen oder Schrauben nicht entfernt werden.
i)
Laden Sie keine Einwegbatterien auf!
j)
Laden Sie niemals beschädigte oder defekte Batterien
auf!
k)
Laden Sie niemals eingefrorene Batterien auf!
l)
Schützen
Sie
das
Gerät
vor
widrigen
Witterungsbedingungen,
insbesondere
Niederschlägen. Verwenden Sie das Gerät nur in gut
gelüfteten Räumen.
m)
Schalten Sie das Ladegerät immer aus, wenn Sie
Ladekabel an die Batterie anschließen oder von der
Batterie trennen.
n)
Legen Sie den Akku niemals direkt unter oder auf
das Batterie-Ladegerät. Stellen Sie das Ladegerät so
weit wie möglich von der Batterie entfernt auf. Das
Batterie-Ladegerät kann eine Funkenquelle sein oder
ein Lichtbogen erzeugen.
o)
Stellen Sie das Batterie-Ladegerät nicht unter die
Motorhaube des Fahrzeugs.
4
vor
Rev. 16.06.2021
U S E R M A N U A L
Legend
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
Class II protection device with double insulation.
Only use inside.
PLEASE NOTE! Drawings in this manual are for
illustration purposes only and in some details it
may differ from the actual machine.
The original operation manual is in German. Other
language versions are translations from German.
USAGE SAFETY
ATTENTION! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
Whenever "device" or "product" are used in the warnings
and instructions, it shall mean Car battery charger. Do not
use in very humid environments or in the direct vicinity of
water tanks. Prevent the device from getting wet. Risk of
electric shock! Do not cover air inlets / outlets. When in
use, do not put your hands or other items inside the device!
ELECTRICAL SAFETY
a)
The plug has to fit the socket. Do not modify the plug
in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b)
Avoid touching earthed elements such as pipes,
heaters, boilers and fridges. There is an increased risk
of electric shock if the earthed device is exposed to
rain, in direct contact with a wet surface or operating
in a humid environment. Water ingression into the
device increases the risk of damage to the device and
of electric shock.
c)
Use the cable only in accordance with its designated
use. Never use it to carry the device or to pull the
plug out of a socket. Keep the cable away from heat
sources, oil, sharp edges or moving parts. Damaged
or tangled cables increase the risk of electric shock.
d)
If using the device in a humid environment cannot
be avoided, a residual current device (RCD) should be
applied. The use of an RCD reduces the risk of electric
shock.
SAFETY AT THE WORKPLACE
a)
Make sure the workplace is orderly and well
lit. A messy or poorly lit workplace may lead to
accidents. Try to anticipate what may happen,
observe what is going on and use common sense
when working with the device.
b)
Do not use the device in an explosion hazard zone,
for example in the presence of flammable liquids,
gasses or dust. The device generates sparks which
may ignite dust or fumes.
c)
Upon discovering damage or irregular operation,
immediately switch the device off and report it to
a supervisor without delay.
d)
If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
Rev. 16.06.2021
EN
e)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f)
If a fire starts, use solely powder or carbon dioxide
(CO
) fire extinguishers suitable for use on live
2
devices to put it out.
g)
Children or unauthorised persons are forbidden from
entering a work station. (A distraction may result in
a loss of control over the device)
h)
When charging batteries emit gasses which might be
explosive. Avoid contact with sparks and fire.
REMEMBER! When using the device, protect children
and other bystanders.
PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
When working with the device, use common sense
and stay alert. Temporary loss of concentration whilst
using the device may lead to serious injuries.
c)
This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitude or lack of experience and/
or knowledge, unless they are supervised by
a person responsible for their safety or have received
instruction from this person as to how the device is
used.
d)
Do not overestimate your abilities. When using the
device keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
SAFE DEVICE USE
a)
Do not overload the device. Use appropriate tools for
the given task. A correctly selected device will perform
the task for which it was designed better and in a safer
manner.
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and have to be repaired.
c)
Make sure the plug is disconnected from the
socket before attempting any adjustments, tool
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device, who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Maintain the device in a good technical state. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory fitted guards and do not loosen
any screws.
5

Publicidad

loading

Este manual también es adecuado para:

Cbc-70w-4a