Publicidad
Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
AIR DIRECTION SWITCH.
The direction of the air blown from the jigsaw can be
changed by sliding the selection lever (17). When fa-
cing forwards, it helps to keep sawdust out of the line
of cut. By turning it backwards and fitting the nozzle, a
vacuum cleaner can be attached.
MAINTENANCE.
The jig saw has been designed for a long working
life with minimum maintenance. Optimum use
depends on correct care of the jig saw and regular
cleaning. To prevent accidents, always unplug the
jig saw from the power source before cleaning or
performing any maintenance. The jig saw may be
cleaned effectively using compressed air after each
use. If compressed air is not available, use a brush
to remove dust from the jig saw. Motor ventilation
vents and switch levers must be dept clean and free
of foreign matter. Do not attempt to clean by inserting
pointed objects through openings. Cetain cleaning
agents and solvents damage plastic parts, among
them are gasoline, carbon tetrachloride, chlorinated
cleaning solvents, ammonia and household cleaners
containing ammonia. Do not use any of these to
clean the jig saw. Should excessive sparking occur,
have a Werku
official repair service exam and/or
®
replace the carbon brushes.
ENVIRONMENT PROTECTION.
The materials and components that have been
used to manufacture this product can be re-used
and recycled. Werku
Management System that is in charge of the correct
elimination of the residues of this product. Do not
eliminate this product with domestic residues.
Werku
offers to its clients a free collection service
®
of these residues through any of its sale points, or in
the collection points established by the Integrated
Management System or in the recycling point of
your locality.
WARRANTY AND TECHNICAL SERVICE.
Werku
offers a warranty that covers the repair
®
of all defects found due to faults in the materials
or manufacture. For this cover to be effective it is
necessary for these defects to appear within the
validity period. The consumer is entitled to free
repair of all defects (shipping costs, labour costs
and materials included), either via the repair or by
replacement (if necessary, with a later model). In
any case, Werku
will not accept replacements if
®
is adhered to an Integrated
®
these represent a disproportionate cost compared
to the cost of repair. This warranty does not affect
consumer's rights established by European or
national laws. The validity period of this warranty
is 3 years. The validity period starts on the date of
purchase by the first consumer. This date is shown
on the invoice or receipt of purchase. Any claims
arising from this warranty must be presented to
the Werku
Assistance Service. To do so you must present
this warranty correctly completed and stamped by
the distributor, together with the sales invoice or
receipt. To require any information in relation to this
warranty, the buyer and/or distributor may contact
the Technical Assistance Service by telephone
on +34 981 648 119, or by e-mail at info@werku.
com. This warranty does not cover defects caused
by parts that have worn out from use other types
of natural wear, defects caused by failure to
observe the instructions for use and operation,
or for applications other than those for which this
product is intended, abnormal environmental
factors, overloading, or unsuitable maintenance or
cleaning, faults caused by the use of spare parts,
accessories or replacements that are not original
Werku
parts, if the product has been totally
®
or partially disassembled, modified or repaired
by personnel other than that of the Technical
Assistance Service or minimum and irrelevant
irregularities for suitable use or operation. Repairs
and replacements will not extend or renew the
validity period of this warranty. The replaced parts
will become the property of Werku
sends the product to the Technical Assistance
Service, and it fails to comply with the conditions of
this warranty, all expenses and transportation risks
shall be paid by the buyer. This warranty is only
valid within the territory of the European Union.
The company responsible for the compliance of
this warranty is Werku Tools SA.
TECHNICAL ADVICE.
The technical department of Werku
disposal to resolve any questions you may have
regarding to its products. If you wish to contact our
team, send an e-mail to info@werku.com.
6
English
distributor or the Werku
®
Technical
®
. If the buyer
®
is at your
®
Publicidad
