YAT YT5220 Instrucciones De Montaje página 62

Maintenance
Warning! When the product
is stopped for maintenance,
inspection or storage, always shut
off the power switch, disconnect the
power supply from the main and
make sure all moving parts have come
to a stop.
Clean the product as described below.
Carry out the cleaning and
maintenance works before storage.
Store the product and its accessories in
a dark, dry, frost-free, well-ventilated
place.
Always store the product in a place
that is inaccessible to children.
WARNING! Do not place the product on
its cutting means to avoid damages!
Attach the protection guard to the
spool before storage and transport.
To keep the machine always in good
working condition, you should take
care of the rules
1. Store the cutter, instruction manual
and accessories in a secure, dry
place. In this way you will always
have the information ready to
hand.
2. Remove dust and dirt regularly.
3. Re-lubricate all moving parts at
regular intervals.
4. Never use caustic agents to clean
plastic parts.
SAFETY INSTRUCTIONS
61
Never disassemble the tool or carry
out any repairs. Always have the
trimmer maintained or repaired by a
competent person at an authorized
service center.
1. Keep the product clean and free
from debris after each use and
before storage.
2. Inspect the product before each use
for worn or damaged parts. Do not
operate the product if any parts are
broken or show signs of wear.
3. Ensure the air vents remain clear
from obstruction at all times.
Please refer to the "exploded view with
part list" for the part replacement,
such as nylon wire, cut head, reel and
grass head assy' .
EN