Publicidad
2 Install the Hanging Mount Adaptor assembly to 1.5" PF screw-thread (female)
pipe or to the Wall/Ceiling/Parapet Mount Adaptor and turn it clockwise to
secure to the Pipe or Adaptor.
Make sure you fix the Pipe or Adaptor so that it reaches to the end of the 1.5" PF screw
J
`
thread on the Hanging Mount Adaptor. If not secured tightly, the Hanging Mount Adaptor
may loosen from the Pipe or Adaptor, causing physical damage or malfunction.
(Make sure you check the connection between two components before proceeding with
the next step.)
Make sure all cables are pulled through the hole of Mount Plate.
`
5
Publicidad
