Mount The Camera - Swann SWIFI-2KOCAM Guia De Inicio Rapido

The camera can be easily mounted on a flat surface using the included screws and wall plugs
• The camera can be easily mounted on a flat surface using the included screws (and wall plugs).
(Installation Height ＞�M，Screw Size: �.�MM*��MM PA).
• Choose a location with strong, reliable Wi-Fi reception to ensure best video streaming
Choose a location with strong, reliable Wi-Fi reception to ensure best video streaming
performance. The easiest way to check is to use your smartphone. Connect your smartphone to
performance. The easiest way to check is to use your smartphone. Connect your smartphone to
your Wi-Fi network at the spot you have chosen and see if you get � bars of Wi-Fi signal or more.
your Wi-Fi network at the spot you have chosen and see if you get 2 bars of Wi-Fi signal or more.
• As a general rule, the nearer the camera is to your router, the better the wireless connection
• As a general rule, the nearer the camera is to your router, the better the wireless connection
quality. If you're finding the Wi-Fi signal to be weak or out of range at the location where you
quality. If you're finding the Wi-Fi signal to be weak or out of range at the location where you
intend to mount the camera, consider installing a Wi-Fi range extender to boost the Wi-Fi
intend to mount the camera, consider installing a Wi-Fi range extender to boost the Wi-Fi
coverage of your existing network or you can try connecting an Ethernet cable from the "LAN"
coverage of your existing network or you can try connecting an Ethernet cable from the "LAN"
port of the PoE adapter directly to your router for a more reliable wired connection.
port of the PoE adapter directly to your router for a more reliable wired connection.
Make sure to remove the protective film covering the camera lens
EN once installation is complete.
6

MOUNT THE CAMERA

Adjusting the viewing angle
Loosen the locking ring to pan, tilt and rotate the camera. Tighten
the locking ring back securely to lock the camera's position in
place after adjustment.
WARNING: DO NOT APPLY TOO MUCH FORCE WHEN TIGHTENING
THE LOCKING RING, AS THIS MAY DAMAGE THE JOINT.
If mounting to a wooden surface, screw the camera directly
to the surface. If mounting to a masonry surface (bricks,
concrete), insert wall plugs before screwing the camera to
the surface. Tighten enough to secure the camera in place.