User Manual; Important - IB Connect CAP Manual De Usuario

User Manual

01
02
03
04
+1
294
-0
+0
147
-0,2
Cut an opening in the desk to recess the box
with the measurements specified in figure 1.
IMPORTANT: do not exceed the tolerance
dimensions or the product will not be
installed properly.
After you have cut the opening, insert the box
through the top of the desk.
Bend the four tabs that are best suitedfor holding
the box to the desk.
Use a Phillips head screwdriver to screw the
tabs that you bent using the screws provided.
The box is completely installed.
ES EN