Better Homes and Gardens BH17-084-099-33 Manual De Instrucciones página 3

3
1/4" x 3" Bolt
(4 used in this step)
1. Unpack the units and confirm that you have all hardware and required parts.
2. Ask for assistance to stand the Headboard (A) upright and position it near the final installation location.
3. Align and attach the metal bed frame (sold separately) to the Headboard (A). Insert the 3" Bolts (1) with
the Lock Washers (2) and Flat Washers (3) through the end brackets of the metal bed frame and the
mounting slots on the headboard posts. At the back of both posts, fit the Flat Washer (3), Lock Washer
(2) and the Hex Nut (4) onto each Bolt (1). Securely tighten the nuts with the provided open wrench.
Assembly Instructions
A
3
2
1
①
3
2
Lock Washer
(8 used in this step)
②
1
Flat Washer
(8 n this step)
used i
③
Hex Nut
(4 used in this step)
④