Firmware Updates - Insta360 Link Manual De Instrucciones

6 Firmware Updates

Method 1: If there's a new firmware version available
and you've installed and opened the Link Controller
software, you'll be prompted to update as soon as
connecting to Insta360 Link. You can go to the More
Settings page and follow the onscreen instructions to
finish the firmware update.
Method 2:
1) Use the included USB cable to connect Insta360 Link
to your computer.
2) Tap the Touch Key three times and check that the
white light flashes. Then, press and hold the Touch
Key for 5 seconds. Once the white light is continuously
illuminated, the camera will have entered update mode.
3) Download the firmware update file here https://www.
insta360.com/download/insta360-link from Insta360's
official website. Copy the file to the Insta360 Link hard
drive named "INSTA360".
4) Repeat step 2, and let Insta360 Link reboot. The
blue light will flash slowly when the firmware is being
updated.
5) After successfully updating, Insta360 Link will return
to its standard mode with the blue light illuminated.
Note: Do not disconnect the USB connection during
the firmware update.
7