Getting Started - ProBreeze PB-MF01 Manual De Instrucciones

Indicator Lights:
1. Warm foamy milk
2. Hot milk
3. Blended hot drinks
4. Cold frothy milk
2
1
Min/Max Capacity Lines:
Maximum capacity for heating
(240ml)
Maximum capacity for frothing
(115ml)
Minimum capacity for heating
and frothing (60ml)
Whisk:
These images are for reference only, please
refer to your product.
If you find you're missing any parts from
your order, please contact our customer
care team by emailing help@probreeze.com
for fast and friendly help.
6 of 56 | English

GETTING STARTED

― ―
Before first use: please thoroughly clean the
jug and all accessories provided.
1. Clip the whisk into the bottom of the
jug. Ensure it is clipped in properly and
completely attached to the bottom of
3
the jug or it won't create foam.
2. Pour the milk into the jug. See the table
4
below for reference as to which max
capacity line to fill the jug to.
3. Press the power button to turn the milk
frother on.
WARM FOAMY MILK
Create warm and dense milk foam, ideal for a
latte macchiato.
1. Press the power button once.
2. The milk frother will beep once and the
Warm Foamy Milk indicator light will be
on.
3. The milk will froth for 80 – 150 seconds,
then the appliance will beep once and
stop frothing.
4. The light will continue to flash for 30
seconds.
5. Press the power button once to turn off
the milk frother.
HOT MILK
Create warm milk at the perfect temperature
for a café latte.
1. Press the power button twice.
2. The milk frother will beep twice and the
Hot Milk indicator light will be on.
3. The milk will heat for 125 – 240 seconds,
then the appliance will beep once and
stop heating.
4. The light will continue to flash for 30 seconds.
5. Press the power button once to turn off
the milk frother.