Ledwood ROUND300 Guia Del Usuario página 6

- Press and hold down the MODE/REC button for 2 seconds.
- You will hear a 'short beep' that indicates that recording has started.
- Once the recording is finished, press the MODE/REC button for 2 seconds to stop recording.
- You will hear 2 'short beeps', indicating that recording has stopped.
DELETING RECORDED MUSIC
If you wish to delete a song while it is playing from your flash memory, USB stick or SD/MMC card, hold down the
play-pause/Del button for 2 seconds. You will hear 2 'short beeps' confirming that the song being played has been
deleted.
BLUETOOTH FUNCTION
- Press the 'MODE/REC' button to select the Bluetooth mode.
- Open your Bluetooth settings and search for 'ROUND 300' to connect.
OPERATION OF THE BLUETOOTH PORT
- Turn the ON/OFF button and click the Mode button three times, the Bluetooth indicator will flash rapidly in blue.
- Place a record on the turntable platter or insert an SD card or USB stick.
- Activate the power supply of your Bluetooth speaker or Bluetooth earphones and make sure that it is in search
mode.
- After waiting 10-15 seconds, the Bluetooth indicator will be blue and Bluetooth will be successfully connected.
MAINTENANCE
REPLACING THE STYLUS
1 Push the tone-arm lock to release the tone arm.
2 Remove the white cover to expose the needle.
3 Carefully separate the cartridge (red and black unit) from the tone arm.
4 Remove the stylus (red element) from its black base.
5 Install the new stylus and carry out all operations in reverse.
NB We also recommend you replace your stylus periodically (approx. every 250 hours).
NOTICE
Our products are guaranteed for two years under the European legal conformity guarantee.
Ledwood products are designed and produced to provide the best possible customer experience in terms of quality
and technology. That is why the vast majority of our products satisfy your requirements and are beyond reproach.
However, it is possible that a product may be flawed due to the production line, therefore it is our obligation to inform
the public about the two-year warranty that concerns all our products.
6