Tally Genicom 9050N Guia De Instalacion página 8

Chapter 1 Introduction
No. Name
1 Parallel Port, IEEE 1284
2 Ethernet 10/100 BaseT connection
3 USB port
4 Serial RS232 port
5 Ground Fault Interrupt (GFI) reset
6 Power cord connector
7 Finisher power connection
8 High Capacity Feeder (Tray 6) connection
9 Finisher connection
10 A3 or Tandem Sheet Feeder (Trays 4/5) connection
11 Duplex module connector
4
Description
Connect the parallel cable here.
Connect the Ethernet cable here.
Connect the USB cable here.
Connect the Serial cable here.
Use to reset power interruption.
Connect the power cord here.
Connect the Finisher power here.
Connect the High Capacity Feeder here.
Connect the Finisher here.
Connect the A3 or Tandem Sheet Feeder here.
Connect the duplex module here.
Quick Start Guide