Installation; Removing The Speaker - Fujitsu Ten Eclipse 307DMK2A Manual Del Propietário

Installation

Installation

- Removing the speaker -

1
Remove the hexagonal nut and washer which secures
the speaker and speaker arm together.
2
Remove the speaker arm from the speaker.
Caution
･ The speaker is heavy, so hold it firmly while removing
it from the speaker arm.
･ After removing the speaker, place it on a surface that
will not mark it or allow it to roll around.
Tip
The speaker arm and speaker base are not required
when using the stand.
Give it to the customer for future use if the configuration
is changed.
Washer
−10−
Speaker
Speaker arm
Speaker base
Hexagonal nut