Connecting The Appliance; Servicing; Fitting And Removing The Hooks - Edesa COCOON Manual De Uso E Instalación

Connection rules
-
The appliance must be powered with 220-230 V Single phase 50Hz.
-
The appliance's power supply must be connected directly to the
network after the circuit breaker and without an intermediate switch.
-
The power supply must be connected directly to the network after
the single-pole disconnection mechanism in accordance with the
installation rules.
-
If the power cable is damaged, it must be replaced by the manufacturer,
its after-sales service or any suitably qualified person, in order to avoid
any danger.
CAUTION: These appliances may not be installed stationary on the
French market.
Switch off the electricity supply to the appliance before carrying out any
maintenance on it. You must remove dust from the appliance around
twice a year to maintain its performances.
Never use abrasives or solvents.

FITTING AND REMOVING THE HOOKS

CONNECTING THE APPLIANCE

SERVICING

22