Attaching And Removing The Roller - Emjoi Silk'n MicroNail Instrucciones De Uso

Attaching and removing the roller

Risk of damage to property!
Risk of damage to property!
The microsmooth rollers are made of a flex-
ible material and have surfaces for smooth-
ing or polishing. Compressing the rollers
could damage the surface material.
• Do not compress the rollers.
Risk of damage to property!
If you pull the attached roller off of the
nail polisher axle while the nail polisher is
switched on, you could damage the nail
polisher.
• Never pull the attached roller that is still ro-
• Always switch the nail polisher off before
Attaching a roller
7. Attach the desired roller (
polisher (see fig. A and F).
8. Carefully push the roller completely onto the axle.
9. Gently shake the nail polisher to determine whether the roller is
secure.
Removing the roller
1. Carefully grasp the bottom end of the roller (
2. Pull the roller up and off of the axle
fig. A and F).
tating off of the nail polisher when it is on.
you change a roller.
6 or 7 ) to the axle
5 of the nail polisher (see
2 of the nail
6 or 7 ).
13