Better Homes and Gardens Steele 80 Manual De Instrucciones página 23

Tools required: Phillips screwdriver, Power Drill, 3/8" Drill Bit and Rubber Mallet.
29. Ask for assistance to position the assembled fireplace at the desired location against a wall. If necessary,
adjust the pre-attached Floor Levelers at the bottom of the Fireplace to level the unit. Now, follow the
instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over
restraints to the unit and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping
Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The
tipping restraint is intended only as a deterrent, they are not a substitute for proper adult supervision.
The tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
30. Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace
insert to control your fireplace.
Assembly Instructions
23
A