Installation - Simu DIGICODE HZ 2C Guia De Instalacion

Installation

1. Screw the cap to the wall using flat head
screws.
NOTICE
Apply a silicone seal around the cap to
guarantee tightness.
2. Place the keypad in the cap by inserting
the top of the keypad first.
3. Push the keypad up into the cap until it
reaches the end stop. A small gap re-
mains between the top of the keypad and
the cap.
4. Screw the keypad to the cap. The gap
between the top of the cap and the
keypad will be closed.
26
1 2
4
DIGICODE HZ 2C
3
©
Copyright
2022 SIMU SAS. All rights reserved.