F
26. Pick up the Left Door (O) and attach the extended hinge arms to the hinge bases installed on the Left
Side Panel (F). Loosen the bolt on the back of the hinge base for an easy fit. Align and insert the "U"
slot on the hinge arm under the bolt head on the back of the hinge base. Make sure that both door hinges
engage and function properly. Tighten the bolt on the hinge base to lock the hinges in place.
27. Repeat the same procedure to attach the Right Door (P) to the Right Side Panel (G).
28. Open and close the doors to make sure they are aligned and shut correctly. If necessary, adjust the
screws for a good fit. Refer to the hinge sticker on door for adjustment.
Assembly Instructions
O
1
22
G
P