Whalen BBAVC48-SMB Manual De Instrucciones página 12

Tools required (not provided): Phillips screwdriver, stud finder, power drill and 1/8" drill bit.
15. Position the assembled console at the desired location against a wall. If necessary, adjust the pre-
attached Floor Levelers at the bottom of the Legs (E and F) to level the unit. Now, follow the
instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over
restraint to the Spine and the wall.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be
attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe
required. Please contact your local hardware store for assistance. Young children can be seriously
injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to
prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended
only as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are not
earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be
purchased and installed separately.
16. The console is now ready for use. Be sure to position your Flat Panel TV in the center of the console,
behind the Acrylic Stopper (7).
Assembly Instructions
12
TV
E
F