CONTINENTAL EDISON CECTG4VW1 Manual De Usuario De Encimera página 36

T
H
C
• Apply the supplied one-sided self-
adhesive sealing tape all the way
around the lower edge of the cooktop.
Do not stretch it.
Self-adhesive
sealing tape
• Insert the appliance into the aperture
and fix in position using the brackets
(A) and screws (B). Adjust the position
of the brackets depending on the
thickness of the worktop and tighten the
screws evenly.
B
Separator
A
separator between the base of the
appliance and the drawer unit.
2.2 gAs connection
Assembly of gas supply and leakage
check
Connect the appliance in accordance
with applicable local and international
standards and regulations. First, check
what type of gas is installed on the cooker.
This information is available on a sticker
on the back of the cooker. You can find
EN - 13
I
F
J
Hob
A
B
Hob
A
B
Important: If the appliance is to be
installed above a cupboard or drawer it
is absolutely essential that you place a
HOB
Separator
G
Worktop
t
t>25 mm
Worktop
t
t<25 mm