Connecting Power - Bellman & Symfon BE2022 Maxi Pro TV streamer Manual De Usuario

Step 2:

Connecting power

1 Connect the DC end of the power cord to the power input on
the back of the TV streamer.
2
Connect the USB end to the Maxi power adapter.
3 Fit the adapter plug to the power adapter and connect it to a
wall outlet. The power indicator lights up in green.
You can also power it by connecting the USB end of the power cord
to a TV USB port. This however might delay the TV sound in your
headphones during reconnection.
Power
Power
input
indicator
DC-connector-to-USB
power cord
Step 3: Pairing
Please note that if the TV streamer came with your Maxi Pro, you
don't need to pair the units.
1 On the TV streamer: Press and hold the Bluetooth button until
the Bluetooth indicator starts to blink in blue.
2 On your Maxi Pro: Press the microphone selector. Press and hold
the Bluetooth selector until the Bluetooth indicator starts to blink
in blue.
3 Both Bluetooth indicators will emit a steady blue light to show
that the pairing was successful.
38
USB port
Maxi Pro
power adapter
Using your TV streamer
As long as your TV streamer is connected to power, it will remain on
and automatically reconnect to your Maxi Pro when it returns within
Bluetooth range. Both Bluetooth indicators will light up in blue
when the units are connected.
If you power the TV streamer from your TV, it will start automatically
when you turn on the TV and reconnect with your Maxi within 10
seconds.
Charging your Maxi Pro
Here is how you charge your Maxi from the TV streamer:
1 Connect the USB end of the Maxi charging cable to the USB
charging output on the back of the TV streamer.
2
Connect the other end to the Maxi charger jack.
3 The Maxi battery indicator blinks in green during charging.
USB charging
output
Maxi charging cable
EN
Charger jack
Maxi Pro
39