3 - CH USB
mixer
Instruction manual
Controls
1. Power: Connect the supplied power adapter.
2. Master output: Allows you to connect the equipment to an amplifier or speakers through RCA connectors.
3. External audio inputs (CD players, iPod, turntables, etc.) on Channel 1 and Channel 2, through RCA connectors.
4. Inputs for microphone 1 and microphone 2 with 6.3 mm plug.
5. Earth: Allows the mixer to land.
6. Microphone balance: Allows the balance of microphones 1 and 2 / Cancel the audio output of one of the two
microphones.
7. Microphone level: Allows you to adjust the output level of the microphones.
8. Talkover: Allows you to lower the level of audio sources in order to speak.
9. Input selector: Allows you to choose between external audio equipment (LN) or turntables (PH). Never connect line
level equipment to the PHONO sensitive inputs. When a turntable is not connected, do not increase the volume level, as
you may hear noise. If you do not have a turntable connected, place the control in Line (LN) position.
10. Output selector: Allows you to choose between a Mono or Stereo (ST) audio output.
11. On / Off: Turns the mixer on or off.
12. Connector for USB memory.
13. VU meter: Indicates the output level of Mono or Stereo audio of the master channel / Audio peaks
14. USB playback controls to fast forward, return, stop, play or pause a song.
15. Volume control of hearing aids.
16. Fading adjustment of the USB channel
17. Vanishing from channel 1 to channel 2: Allows you to listen to channel 1, channel 2 or both at the same time.
18. Volume adjustments for Channel 1 and Channel 2
19. Inlet for hearing aids with 6.3 mm plug. It is recommended to use hearing aids with an impedance less than or equal
to 32 Ohms.
Use
Due to the variety of uses that can be given to this
console, we recommend following these points to achieve the
better quality and make the most of the equipment.
- Adjusts all input and output knobs to the minimum level.
- If you have an amplifier or baffle connected to the console,
adjust the volume to low level.
- Connect speakers, headphones or amplifiers in the
corresponding inputs.
- Connect the microphones.
- Connects external audio equipment (such as CD players, iPod,
smartphone, USB, etc.).
- Turn on the console.
Increase the volume level little by little, in order to listen to the
audio signal. When the peak indicator turns on, the volume goes
down, in order to obtain the best sound quality.
- Use the USB playback controls to start, fast forward or rewind
tracks.
1018A
V0.2
MIX-135
Mp3 PLAYER
Please read this instruction carefully to know how to properly use the product
The information presented serves only as a reference.
Due to updates there may be differences.
Check our website www.steren.com for the most recent version of this manual.
CAUTIONS
• This device is not intended for use by persons (including children) whose physical, sensory or mental abilities are different
or reduced, or lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not expose the equipment to extreme temperatures.
• Do not use or store this equipment in places where there are leaks or splashes of water.
• Always use a soft, dry cloth to clean it.
• Do not use the equipment if the eliminator cable is damaged.
• Do not try to open the equipment; may cause malfunction and cancellation of the warranty.
• Do not use solvents to clean it.
• Place the equipment in a place with sufficient ventilation.
• Do not place it near objects that may block the ventilation slots.
• Before turning on the equipment, make sure that the volume controls are at the minimum level.
Specifications
Input:
Microphone inputs:
Phono inputs:
Input line:
Output line:
Earphone output:
THD:
Frequency response:
SNR:
Power adapter
Input:
Output:
Product: 3 - CH USB mixer
Model: MIX-135
Brand: Steren
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year on the other parts from the date of purchase.
CONDITIONS
1. This warranty card with all the required information, invoice or purchase ticket,
product box or package, and product, must be presented when warranty service is required.
2. If the product is in the warranty time, the company will repair it free of charge.
3. The repairing time will not exceed 30 natural days, from the day the claim was received.
4. Steren sell parts, components, consumables and accessories to customer,
as well as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by
unauthorized personnel, improper safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase ticket.
RETAILER INFORMATION
Name of the retailer ____________________________________
Address _____________________________________________
Product ______________________________________________
Brand _______________________________________________
Serial number _________________________________________
Date of delivery _______________________________________
In case your product fails or have questions, please contact your nearest dealer.
If you are in Mexico, please call to our Call Center.
01 800 500 9000
12 V~ 350 mA
20 mv, non-balanced
15 mv 1 kHz, non-balanced
0.8 V, non-balanced
5 V - - - max.
300 mW @1%THD
0.025% S/N vs maximum output
20 Hz – 20 kHz + 1dB
>80 dB
120 V~ 60 Hz 130 mA
12 V~ 350 mA
previous notice.