External Connection And Media Player; Memory Card Operation - Vieta Car VC-HU710BT Manual De Usuario

EXTERNAL CONNECTION AND MEDIA PLAYER
MP3 music files are audio compression format. This
unit can play MP3 directly from files contained on a
USB Memory Stick, SD Card.
USB DEVICE OPERATION
Insert the USB Device
1. Open the cover marked
panel.
2. Insert the USB device into the USB socket. The
unit starts playing from the USB device automatically.
NOTE: Ensure that the USB device contains playable
music.
Remove the USB Device
Before remove the USB stick from the front panel.
Always remember to switch off the unit's power then
remove out the USB Stick.

MEMORY CARD OPERATION

Insert the Memory Card
1. Press panel button to release the front panel.
2. Push the left side of the panel rightward. Pull the
panel towards you to disengage it from the chassis.
3. Insert the card into the card slot in the correct
direction until a "CLICK" sound is heard,
4. Close the front panel, then the unit starts playing
from the card automatically.
Remove Memory Card
Press the unit in off. Press the card until you hear
a click sound, the card is now disengaged. then
remove the card.
on the front
CONNECT THE AUX-IN
Connect the external signal to AUX in jack located
atthe front of the panel, then press Mode button to
select Aux mode. Press Mode Button again to cancel
Aux Mode and return to previous mode.
RESET THE UNIT
You can reset the unit to its default setting.
The RESET button is located on the main unit (as
shown on the diagram). To press it vertically with a
ballpoint pen or metal object will activate it.
The reset button is to be activated for the following
reasons:
1. Initial installation of the unit when all wiring is
completed.
2. All the function buttons do not operate.
3. Error symbol on the display.
Front
19