Technical Parameters - Brezza FRE170 Manual De Instrucciones

SPARE PARTS
No.
1
2
3

TECHNICAL PARAMETERS

MODEL
Ratings
MAX Air Flow Consumption
MAX Water Volume
Net Weight
Measurements
MODEL UV BULB
Ratings
Note: Due to constant development of our products in regard to specification and design, we take reservation
for changes without prior notice.
OPERATION INSTRUCTION
1. Pull the unit outwards from the carton and place it on the floor.
2. Check if the spare parts are complete, same as the spare part list.
Place the unit on the floor.
3.
Note: Two wheels with stopper are for the two front holes and Two wheels
without stopper are for the unit.
Pull out the cover of water inlet to fill with water (shown as fig.1).
4.
Note:
Water level must be between the MIN and MAX line.
 After few days operation, dust and dirt may reserve in
water tank. It is recommended to change water and clean
water tank frequently.
5. Only use the unit with correct power required.
Designation
Air cooler
instruction manual
remote control
FRE170
220-240V/50Hz 350W
3500m³/h
40L
18KGS
416X515X1700mm
E17-3W Mini UV bulb
AC 10V 3W
WATER INLET
26
Quantity(pcs)
1
1
1