After Use/Warranty/Troubleshooting - Yonanas YOPB300 Manual De Usuario

AFTER USE/WARRANTY/TROUBLESHOOTING

AFTER USE
To clean your Yonanas blender, turn off
unplug the cord. Follow the maintenance
and cleaning instructions on page 7. Make
sure the parts are completely dried before
reassembly. Store your Yonanas blender out
of the reach of children.
WARRANTY
The Legacy Companies, maker of Yonanas
Personal Blender, issues a 1-year limited
warranty from the date of purchase. The
warranty says this product will be free from
manufacturer's defects in material and
workmanship. The Legacy Companies, at
its sole discretion, will repair or replace this
product or any component of the product
found to be defective during the warranty
period. Replacement will be made with a
new or refurbished product or component.
If the Yonanas Personal Blender is misused,
dropped, or damaged at fault of user, the
warranty can be declared void.
Please contact us at www.yonanas.com.
Any replacement of the electrical cord should
only be made by the manufacturer, its service
agent or similarly qualified person. This
warranty does not cover any defect caused
by an accident, misuse, abuse, improper
installation or operation, lack of reasonable
care, unauthorized modification, loss of parts,
tampering or attempted repair by a person
not authorized by the distributor.
8
TROUBLESHOOTING
Motor not working or stops working
• Plug not properly plugged in or no power
in the outlet.
• Blending cup/blade assembly is not installed
correctly. Check the blending cup/blade
assembly is correctly placed onto the base.
• Motor protector isn't working, restart after
20-30 minutes
Stops working
• Too much food in the blending cup which
caused an overload. Remove the blending
cup/blade assembly from place and
decrease the food in the blending cup and
reposition/ restart.
• Overload occurred due to more than
1 minute of continuous use.
Restart after 30-60 minutes.
Leakage on the blending cup and
blade assembly
Make sure the lid or blade assembly is
properly assembled to the blending cup.
Leakage may occur if it is misaligned when
twisted onto the blending cup. The lid should
be turned tightly clockwise.
Blade not working
Food in the blending cup is too big; take out
the food and cut into smaller pieces.
Unusual smell during initial use
It is normal that an unusual smell may occur
during first time use. After several uses, this
smell will disappear.
Unusual smell if operated longer than
1 minute of continuous use
If unit is operated continuously for longer
than 1 minute, an unusual smell may also
occur. In such a case, turn it off, and let it cool
down for 60 minutes.