Pelonis NTY15-16LA Manual Del Propietário página 5

MAIN TECHNOLOGY SPECIFICATIONS
Power supply: AC 120V ~ 60Hz
MODEL
NTY15-16LA
TROUBLESHOOTING
If the product does not operate or does not operate properly, first check according to the following
list. If the reason the product does not operate or does not operate properly is not included in the
following list, the product mayhave failed. At this time, it is recommended to send the product to
the dealer or the Media Service Center for treatment .
Problem
A er the power is
engaged, the power
indicator light does not
illuminate and the
machine does not work.
The machine suddenly
stops during hea ng.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least one time during the operating season in
order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH
OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for off-
season storage.
Turn the heater "OFF", unplug it and wait for the heater to cool down.
Use a dry cloth to clean only external surfaces of the heater.
Do not use any cleaning agents or detergents.
Never immerse the heater in water.
Pack the heater in the original carton and store it in a cool and dry place.
READ AND SAVE THESE INSTRUCTIONS
POWER REGULATION RANGE (W)
LOW HIGH
900 1500
Possible Cause
The plug may not be
plugged well.
The temperature control
knob is not turned in
place.
The temperature exceeds
the threshold of the
thermal cut-o .
LOW OSC
900
Solu on
Check whether the plug is
properly inserted into the
receptacle.
Check whether the
temperature control knob
is turned to the ON
posi on.
Cool the machine before
use.
4
HIGH OSC
1500