• Push the telescopic extension tube into the suction hole opening (Fig.2)
• Adjust the length of the telescopic tube by pushing the locking mechanism down and
pulling out the bottom section of the tube to a suitable length. (Fig. 3)
Use the accessories
Floor nozzle
• Fit the floor nozzle into the telescopic tube. (Fig. 4)
• The floor nozzle has two settings. When cleaning hard surfaces(parquet flooring, floo-
ring tiles, etc.), the nozzle brushes should be extended. When cleaning carpets and mats,
the brushes should be retracted into the nozzle. Press the brush change button to switch
between the two settings. (Fig. 5)
20
Fig. 3
Fig. 4
Fig. 5
Fig. 2