The
product
described in Directive 2006/66/EC,
which cannot be disposed of with
other
household
check your local battery disposal
regulations as proper disposal helps
prevent
environmental
and health loss.
This logo indicates that the receiver
complies with the conditions of
Directive
compliance by Member States with
electromagnetic
regulations and the conditions of
Directive
compliance by Member States with
low-voltage and safety regulations
related to the operation of electrical
equipment.
CONTENTS OF THE BOX
5
Unpack the receiver and check if all the
listed items are included
1 x Remote Control
1 x User Manual
1 x Receiver
1 x AC adapter
1 x DV-OUT Cable
2 x AAA Battery
1 x Warranty Card
DEVICE DESCRIPTION
7
FRONT PANEL
7.1
1) LED display – displays the channel or clock/time
2) CH- - changes to the previous channel without using the remote control
3) CH+ - changes to the next channel without using the remote control
4) Standby – turns the decoder on or off
contains
batteries
waste.
Please
pollution
2004/108/EC
compatibility
2006/95/EC
regarding
IMPORTANT TIPS FOR
6
OPERATING THE RECEIVER
Thanks to the use of the on-screen menu
(OSD), the operation of the receiver has
been simplified and the number of keys on
the remote control has been reduced. All
functions are displayed on the screen and
can be controlled by a small number of
keys. The common functions are combined
into one MENU. The selected function is
marked with a color. Depending on the
on
option selected, "Function keys" are
shown: red, yellow, green, blue in the
form of graphics and description. The
colors represent the different functions in
each menu. By pressing the key on the
remote control, the selected function will
be triggered. The so-called function keys
are active only if there is information
about them in the corresponding field. The
user interface allows you to navigate
within menus and functions in several
ways. Direct access to the function is
possible thanks to some buttons on the
remote
control.
multifunctional, which means that their
functions depend on previously activated
elements.
NOTE! Please note that the new software
may change the functionality of the
receiver. Photos and descriptions included
in the manual are for illustrative purposes.
If you notice an error, please report it, we
will do our best to correct it.
Ariva 175 Combo
The
buttons
are
41