Getting Started; Charging The Battery; Pairing The Blue Multi - Mr Handsfree Blue Multi Manual Del Usuario

GB
The mr Handsfree Blue Multi is compatible with most Bluetooth
The 2 devices (the Blue Multi and your mobile phone) only need to be within a maximum of 10 meters of
each other to ensure optimal operation, so you do not need to take your phone out of your pocket or bag
to make and receive handsfree calls via the Blue Multi.
Attention!
since Bluetooth
some functions described in this user's manual could be different or may not be available . (Please
refer to the manual of your mobile phone for more detailed information.)

CHARGInG tHe BAtteRY

The Blue Multi comes with a rechargeable battery. Make sure that the Blue Multi is fully charged before
using the device.
Attention!
only use the original chargers included in the packaging to avoid damages .
The Blue Multi offers 2 charging options:
1. Via the USB cable (13).
2. Via the cigarette lighter (12).
The LED indicator (5) will light red when the charging process begins.  The battery is fully charged when
the red LED indicator (5) turns off.
Attention!
• If the Blue Multi has not been used for a long time, it might take some time before the red LeD
indicator (5) will turn on .
• to ensure optimal battery quality, you should always charge the battery when the red LeD
indicator (5) is flashing.
tURnInG tHe BLUe MULtI on/oFF
turning on: Press and hold the On/Off button (3) until you hear a melody and the blue LED indicator (5)
starts flashing.
turning off: Press and hold the On/Off button (3) until you hear a melody and the red LED indicator (5)
lights up briefly before turning off again.
Attention!
the Blue Multi will also turn off automatically if there has been no Bluetooth
the Blue Multi and another mobile device for more than 10 minutes .
You are required to pair the Blue Multi with your mobile phone before using it.
First use pairing: When the Blue Multi is turned on for the first time, it will automatically enter pairing
mode and search for available Bluetooth
colors alternately). → Let your phone search for Bluetooth
Blue Multi in the menu of your mobile phone and enter the PIN code 0000* to pair both devices. You will
hear a long beep. → The blue LED indicator (5) will start flashing again.
*PIN code is usually not required for Bluetooth
normal pairing: Make sure that the Blue Multi is turned off. → Press and hold the On/Off button (3)
until the LED indicator (5) starts flashing by blue and red colors alternately. → Let your phone search for
Bluetooth devices. → Select the Blue Multi in your mobile phone and enter the PIN code 0000* to pair
®
both devices. You will hear a long beep. → The blue LED indicator (5) will start flashing again.
*PIN code is usually not required for Bluetooth
Attention!
the pairing process should be completed within 2 minutes . After these 2 minutes, you will
•
hear a beep and the Blue Multi will be turned off . You should then restart the pairing process
from the beginning .
4

GettInG stARteD

phones produced by different manufacturers provide various functionalities,
®

PAIRInG tHe BLUe MULtI

2.1 mobile phones
®
2.1 mobile phones
®
mobile phones.
®
devices (the LED indicator (5) starts flashing by blue and red
®
devices. → Confirm the connection with the
®
connection between
®