Audizio Naples Manual De Instrucciones página 14

You can choose to set "Auto Stereo" or "Forced mono" for the reception.
•
FM full scan
You can always carry out a new scan of FM channels by selecting this option. All current presets and channels will be
erased. The preset list will be saved unless a new preset scan is carried out.
•
FM station list
You can adjust the preset ranking by Move down, Move up or Delete it. Highlight one of the presets, then press [►],
the edit menu will be entered. Press [◄] to return to the preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area automatically through internet connection. These
stations can be accessed by pressing the [Local] button on remote. You can also set Local in another region if you want.
Highlight the Local Radio and press [OK]. Choose Manual-set Local radio to change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible streaming: Repeat All, Repeat One, Shuffle or Normal.
Resume Play Options
This is to set the device whether to return to the last operating mode when it is switched on or displays the home screen.
Power-On Options
This is to select the state of the radio after a power reset or power cut, whether to return to Standby or the state subject to
the option selected from the "Resume play options".
Dimmer
You can set the backlight level for the display as you prefer. There are two settings:
•
Mode - Normal or Power Saving
Normal - the display will stay with the same level of brightness all the time without dim down.
Dim - the display will dim down after 20 seconds if no operation is made on the radio.
•
Level - Bright and Dim
Bright - This is to adjust the level of brightness in Normal mode.
Dim - This is to adjust the level of brightness in Dim mode.
•
Dimmer in Standby (Standby is only enabled when power is connected)
The display brightness in standby mode can be adjusted manually by turning [Tune/OK] or press the [▲/▼] buttons
on the remote. If no further input is registered within 20 seconds, it will stay with the dim value as set in
Configuration.
EQ (Equalizer)
Various music genres can be set.
Buffer Time
Sometimes you may experience uneven playback of the internet radio. This can happen if the internet connection is slow or
network congestion occurs. To help improving the situation, you can choose longer buffer time to get a few seconds of radio
stream before beginning to play.
The default value is 2 seconds. You can choose 5 seconds if you prefer to have a longer buffering time.
AUX-In Gain
If the volume level of the connected auxiliary device is too low, even when the volume on the device is set to maximum, you
may want to adjust the gain to 6dB to achieve a higher volume level.
Reset CD Door
In case the CD cannot be ejected, select this option and choose Yes to confirm. It will take a few seconds to release the CD.
Information
View the Network and System Information of your radio. To access this information quickly, press the [Info] button on the
remote control. When using your PC to manage My favorite stations, you have to use the IP address. This info can be viewed
from here. Then type in the IP address Configuration > Info > Network > IP ) to your PC's browser input window.
Software Update
There may be software release to upgrade features of the radio from time to time.
Check the update regularly to keep your radio up to date with the latest software.
Reset to Default
You can do the reset to clear all the settings and return to default settings.
** Please note all the Station presets, Settings and Configuration will be erased after you have performed the reset.
14