Bigben PARTY Manual De Instrucciones página 15

This LED strip also serves as a power indicator.
• Three other coloured LEDs indicate power connection. They are located to the right of the
battery LEDs.
Blue for Bluetooth, green for AUX IN, white for USB.
• The default setting is Bluetooth: the blue LED flashes when searching for a Bluetooth
connection and stays on once the device is connected. A beep is heard each time Bluetooth
is connected or disconnected.
8. USB port
USB charging output: 5 V DC 2 A (for external power supply) and 5 V DC 1.2 A (for music
playback)
• The charging current of the external power supply may vary with different phone charging
cables or other USB cables.
• When USB media is connected to the USB port, the speaker automatically switches to USB
mode (supports MP3 and WAV files in FAT 16 and FAT 32 formats)
9. Microphone input jack (2 x 6.35 mm jack)
Simply connect one of the microphones supplied and turn on the device to start singing.
10. Aux-in port
When the AUX cable is connected to the 3.5mm power supply, the speaker enters AUX mode.
11. Lighting button (RGB lighting at the front)
• Short press: switching between RGB light and white light.
• Long press: turn on/off the LEDs.
12. Bluetooth mode
Press this button to put the PARTYBTIPKBOX back in Bluetooth search mode and pair it with
another device.
13. Volume
Music volume output level adjustment knob.
14. Treble
Treble adjustment knob (treble for music).
15. Bass
Bass adjustment button (bass for music).
16. Echo
Echo / reverb level adjustment knob (echo for microphone)
17. MIC
Microphone output level adjustment knob
18. Charging port
Power supply: 110-240V~50/60Hz 1A
- EN 15 -