UltraPro 40955 Guia Del Usuario

40955
24-HOUR IN-WALL
DIGITAL TIMER
AFTER INSTALLATION
Use a pencil or toothpick to press and release the
reset button behind the door between the ON TIME
and the OFF TIME buttons.
SET THE TIME
Use up ( ) and down ( ) arrows to select time.
Take note of the AM/PM setting.
CHOOSE YOUR PROGRAM
Note: If no button is pushed for 5 seconds, the
timer returns to clock mode indicated by an arrow
under "CLOCK."
There are three preset times that run individually or
simultaneously. Choose from the following:
COUNTDOWN
EVENING (5PM - 12AM)
MORNING (5AM – 8AM)
When a schedule is chosen, the amber LED
indicator light will turn on. You may run multiple
schedules.
CHOOSE YOUR CUSTOM ON/OFF TIMES
Press and release ON TIME, then use up (
down ( ) arrows to set on time. Press and release
OFF TIME, then use up ( ) and down (
to set off time. If the amber LED is off, the program
will not operate. Repeat for the other ON TIME or
OFF TIME buttons. All programmed times will run
simultaneously in a 24-hour day.
ADDITIONAL FEATURES
COUNTDOWN - This feature turns the light on for a
set period and turns it off when time expires. Press
and release COUNTDOWN, then use up (
down ( ) arrows to set from 1 minute to 24 hours.
Once you reach your desired time setting, simply
walk away and the timer begins counting down.
Your last time setting will be remembered the next
time you use the COUNTDOWN feature.
MANUAL/OVERRIDE - Press and release ON/OFF
button or the closed door to manually control lighting.
Note: When daylight saving time occurs, use up
( ) and down ( ) arrows to adjust the time by
one hour.
READ IT OR WATCH IT
Read instructions or watch easy-to-follow video.
Scan QR code or visit https://byjasco.com/40955i
CLOCK SET COUNTDOWN
AM
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
ON TIME OFF TIME
ON TIME OFF TIME
RESET
BUTTON
CLOCK SET COUNTDOWN
AM
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
CLOCK SET COUNTDOWN
ON TIME OFF TIME AM
ON TIME OFF TIME
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
ON TIME OFF TIME
ON TIME OFF TIME
CLOCK SET COUNTDOWN
AM
) and
) arrows
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
ON TIME OFF TIME
ON TIME OFF TIME
CLOCK SET COUNTDOWN
AM
) and
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
CLOCK ON TIME SET COUNTDOWN OFF TIME
AM
ON TIME OFF TIME
ON / OFF COUNTDOWN
EVENING 5-12 MORNING 5-8
ON TIME OFF TIME
ON TIME OFF TIME
FCC/IC - EN
Supplier Declaration of Conformity | Model #: 40955 | Jasco Products Co.,
10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC and Industry Canada license-exempt RSS
standards. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from which the receiver
is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3(B)/NMB-3(B)
SPECIFICATIONS
120VAC 60Hz
15A General/Resistive
1200W Tungsten
1200VA Standard Ballast
1/2HP
5A or 600W Electronic Ballast/LED
Works with LED, CFL, incandescent and halogen bulbs.
WARNING
RISK OF ELECTRICAL • DO NOT USE TO CONTROL
SHOCK RECEPTACLES
• USE COPPER WIRE ONLY
• SHUT OFF POWER AT FUSE
BOX OR CIRCUIT BREAKER WITH THIS DEVICE
BEFORE INSTALLATION
• TIGHTEN ALL
• DO NOT USE IN WET CONNECTIONS TO 1-1.4 N-M
(8.85 TO 12.39 LBF-IN.)
LOCATIONS
• USE INDOORS ONLY • FOR SUPPLY CONNECTIONS,
USE 14AWG OR LARGER
RISK OF FIRE
WIRE RATED AT LEAST
• DO NOT USE TO CONTROL 75° C
APPLIANCES THAT CONTAIN
• FOR GROUNDING LEAD, USE
HEATING ELEMENTS
12AWG OR LARGER WIRE
(COOKING APPLIANCES,
RATED AT LEAST 75° C
HEATERS, IRONS, ETC.)
• DO NOT EXCEED
ELECTRICAL RATINGS
MADE IN CHINA/HECHO EN CHINA
Distributed by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product comes with a 2-year limited warranty. Visit www.byjasco.com for
warranty details.
Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between
7AM-8PM M-F, Central Time.
©JASCO 2020 | 40955 | 09/11/20 v2