Bluetooth Connection - EDIFIER MF200 Manual

●

Bluetooth connection

Press to switch to Bluetooth input
1. Switch to Bluetooth input when power on. Blue LED will blink rapidly.
2. Select "EDIFIER MF200" in your device setting to connect. Blue LED will be steady lit
after connected.
Note: If your MF200 speaker is not listed on your phone, please switch to Bluetooth
mode by tapping the "
Blue LED
Press and hold to disconnect Bluetooth and clear pairing
records (Bluetooth connected)
" button until the blue LED blinks rapidly.
blink slowly: Bluetooth hidden
blink rapidly: Bluetooth connecting
steady lit: Bluetooth connected
EDIFIER MF200