6.Dimension: 57х55х27 mm
3. Operating Instructions:
1.Press the «ON/OFF» button, it turns on, and the LCD
displays absolute hori- zontal angle. «Level» is displayed on
the screen. Press «ON/OFF» button again to switch off the
instrument.
2.If you lift left side of the instrument you will see arrow «▲»
on the left side of the display. On the right side of the display
you will see arrow «▼» . It means the left side is higher and
right side is lower.
3.Put the instrument on the horizontal stand, and press the
«ZERO» button, the value returns to zero, and the read-out is
the angle value measured relatively to the horizontal stand. In
this mode «Level» is not displayed.
4.Press «Hold/Tilt%» to hold value on the display. To continue
angle measurement press Hold/Tilt% button again.
2