Velleman VAS8A Guia De Inicio Rapido

VAS8A – 8-CHANNEL AUTOMATIC VIDEO SWITCHER
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VAS8A! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Instructions
POWER SWITCH AND DWELL TIME
Push the power button to turn on the power. The green LED will light up. Turn the RUN TIME button to right to
increase the dwell time for each channel from 0.5 to 45 seconds.
CHANNEL SWITCH
(1) BYPASS: the channel will be skipped when activated.
(2) AUTO: when activated, all the channel's cameras will run sequentially.
(3) HOME: display the selected channel.
CHANNEL INDICATOR
A green LED indicates each channel.
• BNC connector for CH1-CH8: video input
• RCA connector for CH1-CH8: audio input
• VIDEO OUT: 2 video outputs to the monitor
• AUDIO OUT: 2 audio outputs to the monitor
• POWER: input for 12VDC / 300mA power adapter
The information in this manual is subject to change without prior notice.
VAS8A
(PS1205R, not incl.)
- 1 - VELLEMAN