Use; Led Light - Batavia BT-CPB001 Manual De Usuario

English

5. Use

Slide the USB Power adapter onto a charged
battery, the adapter should click into place.

LED light

5.1
• Press the on/off button (2) for 2 seconds to
activate the power adapter.
• The control LED (5) lights up to indicate that the
power adapter is activated.
• Press the on/off button (2) the LED light lights
up (100%).
• Press the on/off button (2) again to dim the LED
light (50%).
• Press the on/off button (2) again to switch off
the LED light.
Charging USB device
5.2
• Connect a USB device with a suitable cable to
the power adapter via the USB connection (4).
• Press the on/off button (2) for 2 seconds to
activate the power adapter.
• The control LED (5) lights up to indicate that the
power adapter is activated.
• When the device is charged, the device must be
disconnected from the power adapter.
Note: the power adapter will turn off automatically
after 30 seconds when no USB device is
connected to the power adapter.
12