Power Linking; Fuse Replacement; Control Panel Description - Chauvet DJ SlimPAR Q6 ILS Guía De Referencia Rápida

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Power Linking

It is possible to power link up to 21 SlimPAR Q6 ILS products on 120 V or up to 37 products on 230 V. Never exceed this
number. Power-linking cords can be purchased separately.

Fuse Replacement

1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting clamp
(such as CLP-15N from
Chauvet)
Mounting bracket
Bracket adjustment knob
(x2)

Control Panel Description

Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
SlimPAR Q6 ILS QRG Rev. 2
QUICK REFERENCE GUIDE
Safety Notes.
Safety cable
(such as CH-05 from Chauvet)
EN
2