Technical Data; Mounting; Maintenance And Care; Disassembly And Disposal - dormakaba MUTO Comfort Pocket L 80 Instrucciones De Montaje

dormakaba Montageanleitung
3.2

Technical data

Passage height
Type 1 <= 2 250 mm
Type 2 2 251 mm to 2 800 mm
Door width
Size 1 <= 750 mm
Size 2 750 mm - 1 500 mm
Size 3 <= 2x 750 mm
Size 4 2x 750 mm - 1 500 mm
3.3 Variants
Fig. 3 8-13.5 mm glass
Fig. 4 28-40 mm wood
MUTO Comfort L 80 Pocket
4
All components shown are to be provided by the
customer!
The track rail and the pocket profile must be installed
once the wall pocket is assembled. All other additional
parts can be installed after the wall pocket has been
installed.
Fix the vertically aligned track rail and the pocket
profile to a suspended supporting structure capable
of bearing loads e.g.:
• 100 mm squared timber
• 100 mm aluminum profile
• 100 mm drywall profile
The plasterboard and the fixing materials are not
included in the scope of delivery (customer-provided).
• Use 2x 12.5 mm plasterboard.
• Align the plasterboards flush with the aluminum
The fixing materials for the floor guides are not
included in the scope of delivery (customer-provided).
5
See maintenance manual for manual sliding doors
6
Disassembly is carried out in the reverse order of
mounting and must be carried out by qualified
personnel.
electrotechnical parts and batteries in the designated
acceptance and collection points. Refer to the
statutory regulations for your country.
WN 060329 45532

Mounting

2
6
profile at the main closing edge.
7

Maintenance and care

Disassembly and disposal

The product must be disposed of in an
environmentally friendly manner.
Electrotechnical parts and batteries must not
be disposed of as domestic waste. Dispose of
Mounting
2021-06 7