Charging Indications; Common Problems - New Bee BH58 Guia Del Usuario

Headset：If you encounter connection problems during use, you can
press and hold the volume + and MFB buttons at the same time for 6
seconds, the headset will re-enter the pairing mode, and you will hear the
voice prompt of 'dudu'.
Button
Bluetooth Transmitter: If you encounter connection problems during use,
please press and hold the button for 3 seconds in the power-on state. The
Bluetooth transmitter will re-enter the pairing mode, and the indicator light
flashes red and blue alternately at this time.

Charging Indications

2H
1.In charging:Red light stays on. Fully charged: Blue light stays on.
2.Charging time: about 2 hours

Common Problems

1.Low battery may cause disconnection, in order not to affect normal use,
please charge the headset in time.
2. If the headset fails to turn on, please try to charge it up first, and turn it
on after fully charged.
3. If the battery runs out or has not been used for a long time, there may
be no signal lights at the beginning of charging, but the indicator will
6