Eureka ATOM Serie Instrucciones De Manejo página 30

6.6.3 "MANUAL MODE" DISPENSING MODE ACTIVATION
By pressing the keys (4)
To start dispensing:
• Press the key (4)
With the tank (16) inserted, the (14) button is not pressed.

Delivering through (4) button.
• Insert the filter holder until press the button (14); remove the filter holder to release the
button (14) to stop dispensing.
By pressing the buttons (3)
mode.
6.6.4 FUNCTION BLOCK
By pressing both keys (6)
display appear the icon (22)
Press again both keys (6)
6.6.5 PARTIAL DOSE COUNTER ZEROING
From the dispensing programmed doses screen, long press the (4)
tial counters of doses delivered. The total counter is not reset. To display the total counter,
enter the screen of concealed contents.
6.6.6 APPLIANCE SWITCH ON WITH CONCEALED CONTENTS
Press the key (4)
• Appliance model
• Firmware version.
• 1 and 2 dose total counter (cannot be reset).
• Counter total of continuous grind time.
• Display brightness, adjustable with the keys (6)
Press the key (3)
12
the continuous mode is activated.
Manual Mode
to start dispensing and press it again to stop dispensing.
or (5)
and (2)
.
and (2)
and switch on the appliance, to access the following screen:
Model: Atom
Firmware: X.X
100%
or (5) to return to the dispensing dose screen.
.
the appliance returns to the relative dispensing
the time dispensing setting in locked. On the
to unlock the appliance functions.
INFO
87
78
Tot. Time: 73
and (2)
button to reset par-
.
EN