Adjus Ng The Front Height Of The Seat In Rela On To The Ground; Adjus Ng The Front Seat Height In Rela On To The Ground - Decathlon BW500 Modo De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
4.3

Adjus ng the front height of the seat in rela on to the ground

The front height of the seat in rela on to the ground can be adjusted to between 480 and 530 mm, following
the indica ons below:
Remove the padded protec on from the front of the frame.
Unscrew, but don't remove, the "F1" screws which a ach the front mounts to the base of the frame.
Unscrew, but don't remove, the "F2" screws to release the rota on of the front mounts in rela on to
the seat.
Unscrew and remove the "G" screws which a ach the front telescopic sec ons of the frame.
Select the desired seat height in rela on to the ground, measured between the edge of the seat and
the ground (FH).
Put back and securely a ach the "G" screws in the new posi on.
If no other changes are required for the seat configura on, properly a ach the "F1" and "F2" screws
which were previously unscrewed.
4.4

Adjus ng the front seat height in rela on to the ground

10

Publicidad

Tabla de contenido
loading

Tabla de contenido