Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Rechargeable Battery: Your 2WT13R-SF
is equipped with a rechargeable battery.
Use the included FT-USB CHARGER to
charge your remote. We recommend
charging your remote before first use.
Charge time is approximately 2 hours.
Register online at www.compustar.com
within 10 days of purchase to activate
your new remote's warranty.
2WT13R-SF_QuickCard line 20200810.indd 1
QUICK START CARD
QUICK START
Hold this button for 4 seconds to power up the remote.
4 seconds
Tap this button 1 time to lock and/or arm your system.
Double tap this button to activate AUX 2 output when "Secure AUX mode" is disabled.
x 2
Hold this button for 5 seconds to activate "panic" or "vehicle locator" feature
5 sec
NOTE: additional connections may be required.
Tap this button 1 time to unlock and/or disarm your system.
Double tap this button to activate AUX 1 output when "Secure AUX mode" is disabled.
x 2
Hold this button for 2.5 seconds to activate rear hatch/trunk release.
2.5 sec
NOTE: additional connections may be required.
Tap this button 1 time to wake up remote once awake tap again to update the
system status.
Tap this button 1 time to temporarily disable Secure AUX mode.
Double tap this button to ENTER remote user option. Use "
navigate the user features and a single tap of the "
features.
x 2
ONLY while the vehicle is remote started, double tap this button to RE-Start
remote start runtime.
Hold this button for 2.5 seconds to activate OR cancel the remote start sequence.
2.5sec
Hold this button while in the remote user option for 2.5 seconds to EXIT the user option.
8102REUCL002200 // 2WT13R Guide REV1.0
2WT13R-SF
/
" to enter selected
Firstech, LLC. | 1
2020/08/10 10:20:21
" to

Publicidad

loading

Resumen de contenidos para CompuSTAR 2WT13R-SF

  • Página 1 Tap this button 1 time to wake up remote once awake tap again to update the system status. Tap this button 1 time to temporarily disable Secure AUX mode. Rechargeable Battery: Your 2WT13R-SF is equipped with a rechargeable battery. Double tap this button to ENTER remote user option. Use "...
  • Página 2 Parking lights will flash. Then tap the Lock button on your remote. Repeat for any additional remotes. All remotes must be programmed during one This will enable/disable This feature will power sequence. If you receive two parking light flashes, your Compustar has exited the proximity unlock down the LCD remote. Power Proximity remote programming mode and you must retry.
  • Página 3: Mise En Route Rapide

    REMARQUE: des raccordements supplémentaires peuvent être nécessaires. Pressez ce bouton 1 fois pour réveiller l'écran de la télécommande; une fois réveillé, Batterie rechargeable : votre 2WT13R-SF pressez de nouveau pour actualiser l'état du système. Pressez ce bouton 1 fois pour désactiver le mode AUX sécurisé provisoirement.
  • Página 4 Si vos feux de stationnement clignotent Power Proximity tension. Maintenez pressée REMARQUE : une deux fois, votre Compustar a quitté le mode de programmation de UNLOCK programmation « » pendant 4 télécommande et vous devez réessayer.
  • Página 5 Presione este botón una sola vez para desactivar temporalmente el "Modo seguro de AUX". Pila recargable: el 2WT13R-SF está equipado con una pila recargable. Utilice Presione este botón dos veces para acceder al opción de usuario del control remoto. Utilice el cargador FT-USB provisto para cargar los botones de "...
  • Página 6 Si recibe dos destellos de las luces de posición, significa que el desactivar la función de apagar la pantalla LCD del control Compustar ha salido del modo de programación del control remoto y desbloqueo por proximidad control remoto. Para hacer...