Características Técnicas; Instalación - SkillKorp SKP GS10 Guia De Inicio Rapido

The space under the top bar (see photo below) is normal. It is used to even out the tension of the screen.
−
Do not install the screen in a place that is exposed to wind or drafts. This could cause the screen to
−
move and therefore affect the picture quality.
Do not use the screen in front of a window or with a light behind the screen.
−
Do not expose the screen to direct sunlight for long periods of time. Keep the screen away from intense
−
heat sources such as a lamp or flame.
Do not attach any objects to the screen.
−
To protect the screen and extend the service life of the tension springs, please roll it up into its storage
−
case, close the case and fasten the locks. Leave it in a horizontal position on its base.
Pay attention if children are near the screen. Do not allow children to use the screen unsupervised.
−
Keep the screen away from dust and dirt. If the screen gets dirty, gently wipe it with a soft cloth moistened
−
with a little water and a mild, neutral detergent (such as washing-up liquid). Benzene, thinners and
other volatile substances should never be used to clean the screen since they could cause permanent
damage.
Never immerse the screen in water or any other liquid.
−
Do not iron the fabric. Little creases disappear after a period of time.
−
Do not disassemble or attempt to repair the screen yourself; please contact a professional for help.
−
Mechanically stressed parts such as springs or pistons may cause injury.
10_SAFETY PRECAUTIONS
CARACTERÍSTICAS TÉCNICAS
Dimensiones de transporte (La x An x Al): 162,5 cm x 12 cm x 13 cm
−
Dimensiones del fondo verde: 150 cm de ancho, hasta 187 cm de alto
−
Peso: 8,3 kg
−
Material de la caja: Aluminio
−
Material del fondo verde: Poliéster
−
INSTALACIÓN
Siga las etapas de instalación siguientes para instalar y guardar correctamente la pantalla verde.
_ INSTALACIÓN
Gire a 90° los pies soporte izquierdo y derecho que se encuentran debajo de la caja de almacenamiento
1.
tal como se indica en la figura 1 siguiente:
Pestaña
Levantar
Desencajar Desencajar
Características técnicas_11