DeLOCK 63957 Manual Del Usuario página 4

English
Clone Function without PC
1.
Connect the power supply to the DC jack of the Docking Station and connect
the power supply to the socket-outlet.
2. Insert the HDD / SSD from which you want to copy the data into slot HDD1
(Source).
3. Insert the HDD / SSD on which you want to save the data into slot HDD2
(Target).
4.
Switch on the Docking Station.
5. The red LED on both slots lights up permanently.
6. Press the clone button for about 5 - 8 sec. in order to activate the clone
process.
7. The LED indicates a copy process.
8.
The copy process is completed as soon as all LEDs light up blue.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 09/2018
-4-