DeLOCK 63958 Manual Del Usuario página 3

English
Package content
• Docking station
• Cable USB-C™ male to USB-C™ male, length ca. 80 cm
• External power supply 12 V / 2 A
• User manual
Safety instructions
• Protect the product against moisture
• Protect the product against direct sunlight
• Pay attention that the HDD can be hot when it is connected to the device.
Installation of the Docking Station
1.
Start your Computer.
2. Connect the power supply to the DC jack of the Docking Station and connect
the power supply to the socket-outlet.
3. Plug the USB cable to the Docking Station and to a free USB port of your
computer.
4.
Insert your 2.5" or 3.5" HDD / SSD into the slot of the docking station.
5.
Switch on the Docking Station.
6. The HDD will be recognized by your computer as a drive and is ready to use.
If necessary you may need to set or partition your drive through the data
manager.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 10/2018
-3-