Other Problems - Hyundai Mobile P280 Manual Del Usuario

Other problems

If your mobile cannot pair the watch, click Settings
Bluetooth in your mobile and check if there is
signal of P280. If yes, it means there is no problem
with the Bluetooth signal. Please check if the
watch is paired with other phones, please
unbind it. IOS device users should click Setting -
Bluetooth - ignore this device and then pair it.
Exemption Clause
1. The Hear Rate, Blood Oxygen and Blood
Pressure data output by P280 are not intended
to be a medical or diagnostic basis.
2. Self-diagnosis and self-treatment are dangerous.
Only quali ed physicians are allowed to diagnose
and treat high blood pressure or any other heart
diseases. Please contact your physician for more
professional diagnostic opinions.
3. P280 smartwatch data such as heart rate,
blood pressure, etc. may not be completely
accurate due to factors such as interference
with environmental signals, wearing posture,
changes in the climate environment, and physical
condition.
4. DO NOT carry out drugs and treatment on
the basis of the monitoring data provided by
26
P280, and should follow medical advice when
medication and treatment are required,and we
are not liable for the inaccuracy of monitoring
d a t a a n d t h e c o n s e q u e n c e s o f m i s u s e
o f monitoring data and information.
Specific Absorption Rate
(SAR) certification information
Your device conforms to U.S. Federal Communica-
tions Commission (FCC) standards that limit
human exposure to radio frequency (RF)
energy emitted by radio and telecommunica-
tions equipment. These standards prevent the
sale of mobile devices that exceed a maximum
exposure level (known as the Specific
Absorption Rate, or SAR) of 1.6W/kg. SAR
information on this and other model devices
can be accessed online on the FCC's website
through transition.fcc.gov/oet/rfsafety/sar.html.
In normal use, the actual SAR is likely to be
much lower, as the device has been designed
to emit only the RF energy necessary to
transmit a signal to the nearest base station.
By automatically emitting lower levels when
possible, your device reduces your overall
exposure to RF energy.
The FCC has granted an Equipment
Authorization for this model device based on
27