Troubleshooting - Livoo DOP219W Manual De Usuario

Bowl:
Clean the inside of the bowl with a non-abrasive
cloth dampened with soap and water, then wipe
with a clean, slightly damp cloth. To remove
residue from cooked food, fill the bowl with hot,
soapy water and wash it after allowing it to soak.
You can also wash the bowl in the dishwasher.
Once cleaned, dry the bowl thoroughly with a
clean cloth.

TROUBLESHOOTING

If your Super Cooker malfunctions or fails to operate
• Is the Super Cooker plugged into a grounded outlet?
Plug the Super Cooker into a grounded outlet.
• Is the fuse in the circuit to the Super Cooker in working order?
If you have a circuit breaker box, make sure the circuit is closed. Try unplugging the Cook
Processor, then plug it back in.
• Unable to close the lid
Check the seal position
• Error messages:
E1: Motor overload - Unplug the Super Cooker and allow it to cool for one hour. Then it is ready
to be used again.
E2: No weight is detected or the scale sensor is damaged. Contact the service center.
E3: The mixer bowl is not correctly positioned or a motor drive part is damaged. Correctly
reposition the mixer bowl on the base.
E5: Lack of water in the tank. Add water.
If you cannot resolve the problem:
Contact your usual reseller for the return or exchange conditions.
You have a warranty on this product which is valid for 2 years from the date of purchase
Inner lid seals
The covers have rubber seals.
When washing the covers in the dishwasher or by
hand, remove the seals by pulling them off.
Wash the seals in hot soapy water, then dry them
before reinstalling them.
Imported by:
DELTA
BP61071
67452 Mundolsheim
France
35