Electrical Safety; Safety In The Workplace - MSW -BIH-1500 Manual De Instrucciones

PLEASE NOTE! Drawings in this manual are for illustration purposes only
The original operation manual is written in German. Other language versions are
translations from the German.
2. Usage safety
ATTENTION! Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury or
even death.
The terms "device" or "product" are used in the warnings and instructions to refer to
BOLT INDUCTION HEATER.
1.1.
a) The plug must fit the socket. Do not modify the plug in any way. Using
original plugs and matching sockets reduces the risk of electric shock.
b) Do not touch the device with wet or damp hands.
c) Use the cable only for its designated use. Never use it to carry the device or
to pull the plug out of a socket. Keep the cable away from heat sources, oil,
sharp edges or moving parts. Damaged or tangled cables increase the risk of
electric shock.
d) If using the device in a damp environment cannot be avoided, a residual
current device (RCD) should be applied. The use of an RCD reduces the risk of
electric shock.
e) Do not use the device if the power cord is damaged or shows obvious signs of
wear. A damaged power cord should be replaced by a qualified electrician or
the manufacturer's service centre.
f) To avoid electric shock, do not immerse the cord, plug or device in water or
other liquids. Do not use the device on wet surfaces.
g) ATTENTION! DANGER TO LIFE! While cleaning, never immerse the device in
water or other liquids.
h) Do not use in very humid environments or in the direct vicinity of water
tanks.
i) Prevent the device from getting wet. Risk of electric shock!
1.2.
and in some details may differ from the actual product.

Electrical safety

Safety in the workplace