Connecting The 4K Receiver; Connecting Infrared Return; Placement Of Ir Receiver - Marmitek TV Anywhere Wireless 4K Manual De Instrucciones

1.3 Connecting the 4K receiver

Place the receiver in the room where you want to connect the second
TV or projector.
1. Use the HDMI cable to connect your TV or projector to the HDMI port marked
"HDMI OUT"(2) on the 4K receiver.
2. Connect the power adapter to the connector marked "POWER"(5) and insert the
plug into the wall socket.

1.4 Connecting infrared return

The TV Anywhere Wireless 4K™ has a built-in "infrared return
feature" that enables continued operation of the connected HDMI
source from another room. For example, operate your HDMI source
downstairs from your bedroom (location of second TV).

1.4.1 Placement of IR receiver

The IR receiver receives the commands sent by your (infrared)
remote control and sends these to the IR emitter, enabling you to
operate your connected HDMI source.
The IR receiver located behind the front panel of the 4K receiver. Make sure to
•
place the 4K receiver in line of sight with the remote control (max. 10 meters) for
proper reception.
Please experiment with correct placement before final placement of the 4K
•
receiver.
TV Anywhere Wireless 4K™
TV
IR
5