Know Your Product; Technical Data; Assembly - WorkPro W125048A Instrucciones Originales

Wear safety shoes
Wear protective gloves
Wear close-fitting work clothes

4. Know your product

1. Saw blades (4pc)
2. Soleplate
3. Saw blade holder
4. Quick-change chuck
5. Locking button for soleplate
6. Ventilation holes
7. Switch lock
8. ON/OFF switch
9. Battery pack
10. Display for remaining capacity
11. Push button for capacity display
12. Battery pack release button
13. Control lights
14. Battery charger
15. LED light
Scope of delivery
 Safety and operating manual
 Cordless reciprocating saw
 4pc Saw blades
 Battery pack
 Charger

5. TECHNICAL DATA

MODEL NO.
Cordless reciprocating saw
Idling stroke rate
Stroke
Weight (without battery)
Max. cutting depth for wood
Max. cutting depth for metal
Noise output level (L )
WA
Noise pressure level(L )
PA
Vibration
GB
W125048A
0-2800 min
-1
25 mm
1.8 kg
100 mm
10 mm
93,29 dB(A), K=5 dB(A)
82,29 dB(A), K=5 dB(A)
a =15,83 m/s
2
hB
a =16,47 m/s
2
h,WB
K=1,5 m/s
2
10
BATTERY CHARGER
Rated voltage
Rated power
Charge voltage
Charge current
Protection class
BATTERY PACK
Battery pack type
Rated voltage
Capacity
Charging time

6. ASSEMBLY

Only insert the rechargeable battery once the device
is completely assembled. If the device is switched on
accidentally, there is a danger of injury.
1) Installing/removing the saw blade
Caution! Risk of injury!
 Do not use any blunt or bent bladesor blades which
are damaged in any other way.
 Always insert a suitable saw blade
Mounting the saw blade:
1. Turn the quick-change chuck (3) in the direction of
the arrow and insert the shank of the saw blade (1)
all the way into the slot of the saw blade holder.
The teeth of the saw blade must point downwards.
2. To unlock, release the quick-change chuck (3) so
that it snaps back into the initial position.
3. Check that the saw blade is secure by pulling on it.
Removing the saw blade:
4. Turn the quick-change chuck (3) in the direction of
the arrow and pull the saw blade (1) out of the saw
blade holder.
2) Adjusting the soleplate
Warning! Pull out the battery pack.
To adjust the soleplate, press the soleplate locking
button (5) on the left-hand side in order to unlock the
soleplate (3). Set the required distance and press the
soleplate locking button (5) on the right-hand side in
order to lock the soleplate again. Check that the
soleplate is secure.
200-240V~, 50/60 Hz
70 W
20 V
2.4 A
/ II
Li-Ion
Maximum 20 V
Nominal 18 V
4000 mAh
120 min
(See Fig. A)
(See Fig. B)