MC-HF50.2
2.0 Active Speakers
Introduction.
MODECOM MC-HF50.2 speaker set was designed for those seeking great audio experience
from their PC speakers, having limited space at the same time. Its construction provides
excellent sound performance and its classical outlook makes it a perfect match for any
environment. Speakers are enclosed in MDF board cabinets that offer great acoustics for
the set. Sound control panel was placed on the back side of one of the satellites.
Specification.
•
Dimensions: 170x190x270 mm
•
Drivers: 5'' + 1''
•
RMS Power: 25W x 2
•
Frequency response: 50Hz-20kHz
•
Sensitivity: 88dB
•
Signal input: 2 x RCA
•
2-Wire Passive speaker connection cable length: 200 cm
•
Signal cable mini jack - 2x RCA with a length of 120 cm
•
Power: AC 110V~240V
•
Length of the power cable - 120 cm
•
Net weight: 5.1 kg
•
Gross weight: 6.0 kg
Installation.
Before you begin the installation make sure that the main power switch is in OFF position and
all control knobs are in the maximum left position (rotate it counterclockwise).
1. Place the speakers such that the active speaker is on the right side. To achieve best stereo
effect listener and satellite speakers should form equilateral triangle (each satellite should
be in the same distance from the listener's ears). Preferably try to put the speakers in such
manner that the tweeter speakers are on the same height as your ears.
2. Connect the signal cable with the Mini-Jack 3.5 mm plug to the appropriate output port of
your sound source (for example output of your PC's soundcard).
3. Connect the 2-wire cable to the "L-SPK OUT" on the back of the active speaker and to the
similar socket on the back of passive speaker.
4. Connect the power plug to the mains socket.
5. Switch main power switch to ON position.
6. Start playing sound using your connected sound source.
7. Using the VOLUME knob set up desired volume level.
8. You can adjust the played sound tones using the BASS and TREBLE knobs to suit your
personal preferences.
50/60Hz~1A
UK
15